Review: MyMedic - MyFAK

Accidents happen. Burns, cuts, bumps and breaks can come to anyone at any time.  Having a first-aid kit to hand is a vital element to anyones preparedness loadout or lifestyle. Whether you're hiking in the bush, cutting firewood, camping, on a road trip, driving nails in the backyard or hitting pipe in the sandbox you'll want to be able to plug holes and tend to boo-boos to get on with the task at hand. I keep a generic first aid kit in the bottom of my day-bag, and have a small IFAK on my hiking belt, but there are some jobs they just aren't up to and frankly, being stuffed in the bottom of a pack does not make for rapid treatment in a critical situation.

This is where something like the purpose built MyFAK from My Medic comes into its own. Jam-packed with a very comprehensive collection of needful and useful items for treating a variety of ailments and accidental injuries. It does so all encompassed in a tactically minded form-factor. 

 With contents suitable for airway, bleeding, burn, hydration, outdoor safety, sprains and fractures and specialty surgical incident as well as topical treatment, the MyFAK  has packs that caters to both Basic and Advanced First Aid needs. (Available in two different configurations to suit your ability and need).

"By ordering MyMedic First Aid Kits you warrant that you have the required training and authorization to use the medical supplies contained within. MyMedic assumes no liability for their misuse."

  

https://mymedic.com/collections/first-aid-kits/products/myfak-firstaidkit

The 1000D cordura pouch measures 6.5" wide, 7.5" tall and 5" deep, its no slouch. The advanced kit weighs 1275g, the same size basic weighs a mear 975g. The front of the pouch is rigged with 6" of loop field, in 3 2" strips, with a secondary layer of 1" strips straddling these to provide 4 channels of MOLLE attachment, for those of us who like pouches on our pouches or for stowing additional accessories likepens, lights, cyalume sticks or pry-bars. A 1" wide nylon strap runs all the way around the pouch, with a fastex buckle to keep it fully secured to the backing and fully closed> This is especially important as the backing, which features not only two press-stud closure MOLLE straps but the entire back is hook and loop for tear-away capability. a 1" nylon grab handle allows for positive grip and when unbuckled the MyFAK can be torn off your pack, or load bearing gear for ease of access or to pass on to someone who needs it.

The rip-away design makes for ease of access for what is otherwise quite a bulky pouch. being able to get at it without it being strapped to yourself or a pack would greatly improve your ability to get the components you need in a timely and efficient fashion. Crucial in a medical crisis. The fastex clip is no hindrance to access and does a great job in securing the pouch, but it has two easy-grip rubber toggles with medic crosses to pull the oversized zippers open. A lightly hook-and-looped nylon tab acts as a pull tab to assist in pulling the pouch open and holding it spread. Folding down to the front loop fields to stow out of the way when not in use.

The pouches hook field backing also means once removed it can be stuck to other loop-field surfaces at your leisure.

Opening the pouch up reveals its Tri-Fold Design

MyMedic created this pouch to give you quick access to your First Aid Supplies. This tri-fold design makes it easy to see what you need, when you need it.

Working from the innermost layer forwards the front the back panel has three Elastic webbing loops to contain items, a mylar space blanket, a hank of paracord, a cyalume stick and a RATS tourniquet. Behind that are two pockets with bandages, including quick-Clot and a chest seal. The back most pocket has a hook and loop  closure tab to keep it closed until needed.

The middle panel has more elastic webbing securing more bandages, irrigation saline and suture kits. An additional pocket behind the elastic webbing holds a compressed compression bandage.

I'm really impressed with the amount of material squeezed into this kit, both by clever arrangement of pockets but also arrangement of items. I was tempted to reorganise the kit but quickly recognised I wasn't going to get it any better packed or sorted.



The third section of the internals is the zippered mesh lind pocket panel. It is filled with small items; medications, electrolyte sachets, swabs, lotions and gloves. The section is itself a tear-away as well allowing you to pass it over or just get at it without disturbing the rest of your pristine supplies.

Whilst the rest of the kit is full of bandages, burn kits, and hole closers, the medication pouch holds pain killers, anti-inflammatories, anti nausea and anti-dirorrerals and electrolytes. The mesh panel allows the plastic pouch wrapped medications to be rummaged through. Good if you find yourself off-Oregon trail and not fancying dying of dysentery.  The flip side of the medication pouch provides a smooth field for laying out items: bandages, sutures, tweezers and such as you work on your patient, or just as a cover to prevent debris falling in your kit.

So, apart from being jam-packed with all kinds of goodies and needfuls, being well put together as far as design and layout, and having an excellent quick-release and access options go, this is an excellent First Aid kit.

I find it a bit bulky and heavy to put on my person, say on a battle-belt or on a plate carrier, except maybe on the back. Personally I feel it's suitable to go on a pack, or on a dedicated medic's harness. One thing I saw on their webpage and successfully tried myself was fitting  it to the headrest of my drivers-side car seat. Putting it in easy reach for shot-gun or back seat passengers should the need for road-side assistance come up.

Secured by its Molle straps, to the headrest prongs, it can be accessed by its quick release Fastex clip and pulled free by the webbing drag handle. If needed it could then be reattached in an upright position and unfolded to access its components in a secured place for out the door or back seat triage as needed. Perfect for on-the-move treatment. 

I have a Cert 1 in first aid which is basically: bites, breaks, bleeds and burns and I feel the contents and setup of this kit is more than adequate for my needs, and beyond what I'm trained for in its Advanced format, but not beyond my ability in extremis.

Wish Lust - Survival Hardware - Baccy Pouch

In  a departure from my usual kind of review item I wanted to show some love for one of my co-authors for Breach Bang Clear , David "Norseman" Williams. Norseman has a very popular YouTube channel that I am very fond of.  

As well as tutoring in outdoors skills, Norseman is also an accomplished smith and leatherworker. His small businesses  Survival Hardware LLC - makes Hard tools for hard times. Based in Idaho, USA.

As well as knives and sheathes, wallets and one such piece is this, the hand crafted Baccy pouch.
 Handmade from rugged pull-up type leather that will give you an appealing aged look.

The cowhide is lightweight, yet very durable, as it is chrome tanned.

The Baccy Pouch is designed as a tobacco pouch, has two generous pockets inside, one to keep your loose tobacco in and your smoking accruments in the other. 

 

Now, I'm not  a smoker and I'm not promoting or endorsing it , but I am an avid tea drinker and I figure this would be a good way of keeping my tea in good order, dry and in one spot. I envisage keeping bags and/or loose leaf tea in one pouch and strainers in the other.

The pouch rolls up and is secured with a leather strap.  It is hand stitched with medium weight, 

4 ply twisted and waxed polyester thread. This pouch should be very long lasting and provide a rustic, aesthetically pleasing storage for all your dried consumables.

 

Review: MIG - SORD Mad-Stick holster

My mate Shane from Rhino Ropework (note: they've gone through a branding change recently, now trading as MIG (Mark's Innovative Gear) have teamed up with my friends over at SORD Australia to put together a line of pouches for the most excellent and useful MADSticks by Rhino Ropeworks. You'll recall the MAD Sticks are a compact solid breaching and pry bar, and be pleased to note that they've gone through some more design iterations and are even madder!

One aspect that Shane / Mark wanted to address, is their very pointyness, which even when looped through PALS/MOLLE, can jab and scrape, and the pen-clip type retaining clip sometimes just weren't up to the rugged outdoor needs of some folks, so he and SORD Australia have come up with this 1000d Cordura pouch. I experienced the need for this myself after months of carrying the MAD-Stick around in my fairly rugged Mystery Ranch 1DAP , the point worked its way through the Cordura nylon and stated to poke me in he sides as I walked. This I could mitigate by shifting it around but one time I picked the pack up and the MAD-Stick fell right out and nearly spiked me in the foot.

  As I'd rather not have this happen whilst out in public I had to retire it from my EDC until they good folks and MIG could set me up with a holster.

One did magically appear shortly after I got in touch with MIG, cudos to their customer service. So. The Holster. The MAD Stick is a 400mm (15.7") long, 12.7 mm (0.50" yeah, fifty cal!) length of 4140 high tensile tool steel,  and the SORD design suits it perfectly. Not too snug as to make drawing it an issue, not so loose as to let it rattle about.
The main opening flap is rimmed with hook and loop strips to secure the stick, and backed up with a webbing strap and a Fastex style clip to ad bomb-proof jump-safety to it. Nobody wants to accidentally catch a MAD-stick I assure you. The heavy 1000D Cordura lends itself nicely to giving the whole holster structure and it is heavily stitched throughout. inside the opening flap is a "pointy end down" indicator graphic, but the holster itself is ambivalent. a metal grommet in the bottom of the holster acts more as a drainage point than as a capture point for the spike.  I have also found the chisel end doesn't pull at the hook and loop closures as much as the spike end when doing vigorous runs.
Speaking of attachment:
The back side of the holster features two PALS/MOLLE straps with reinforced stiff panels and a terminal hook and loop strip closure.
Each strip is suitable for 3 rows of MOLLE attachment for a very sturdy fixture. You could strap it to the back of a plate carrier, to the side of a pack or even off the hip of a MOLlE equipped battle-belt such as the Platatac Bongo or SICC belts.

The black holster by itself is fairly innocuous looking but at 16" long it will stand out swinging on your hip. Not very Grey-man. The side-panels of my 1DAP are already pretty crowded so I stow the whole thing inside my pack, unsecured but safely wedged in now that I'm not worried about pointy ends jabbing though my pack. Check out the whole MIG range and new developments here: Now I can keep my totally legitimately useful / rescue tool handy without causing a public panic!
Well done Mark's Innovative Gear and the whole MIG Crew.

Review: BladeTech TEK-LOK Belt Clamping Unit

When it comes to keeping extra gear on my person, and I am not wearing one of my PALS equipped belts, like the subtle SICC belt or the more hooah Condor GEN1 battle belt there are times when you still want to have a well mounted piece of gear, with a more regular belt, even if its the dual-purpose PM Leather hobble Belt ...

When you want to mount carry something with any really weight on a belt, there are really two things that you need to take into account, the strength and stiffness of the belt, and the weight, and method of use  of the item to be carried.

A stable platform, such as that produced by Bladetech in the TEK-LOK belt clamping unit. This is a high density polymer belt clip that allows the user to fasten virtually any kind of load to a regular belt.

The principle is simple. A clam shell hinged design allows the user to quickly and easily slip the mounting over a belt in place, and closes at the bottom, with first a pair of pinch-to-open horns and then a latch that folds up and around, locking the horns from pinching open, both of which are held against the body when worn, keeping them protected from any conceivable accidental release. Inside the clip there are a run of holes cut into the back face, into which two rubberised spacers which can be placed at a variety of spots in order to give the best hold on the belt, as well as eliminating slippage or wobble.

The business side of the clip however is the the flat faced plate which is dotted with a 3 x 3 grid of holes, through which rivets, screws and bolts can be threaded and fitted to the eyelets fitted to many of the  holsters, magazine carriers, phone holsters, knife sheaths and many other types of accessories that you will want to fit to belts and carry around with you. The inside face is recessed so your boltheads don't interfere with the belt, and ensure a safe and secure connection.

With bolts, and rubber spacers you can affix in many different combinations to allow you to set up whatever you are carrying to suit your needs, space and usage you had in mind.

The inner face of the TEK-LOK is slightly curved to marry with the body contours, the width of the top edge of the clip means it offers a stable platform, which as the load increases, becomes more and more important. I set mine up with my HHA ASOT-01 knife as an example and it ran really nicely.

One thing you'll find though is that you are at the mercy of the holster, sheath and carrier manufacturers, as the holes in the item to be mounted will determine how and where you can use the TEK-LOK, so bear that in mind, and if possible, try before you buy to ensure you get a good fit!

Review: Grey Ghost Gear - 6x8 Utility Pouch

I took a bunch of Grey Ghost Gear pouches out for a hike up the easy daytrip, but possibly haunted Hanging Rock State Park, with my family, I wore pouches which I fitted out with a variety of hiking goods, in order to carry whatever needfulls I might have needed on the trip.

The pouches were filled with a variety of hiking goods, whatever I might have needed on the trip. One pouch I used was the 6×8 Utility Pouch .

The 6x8 Utility Pouch is designed to hold a variety of items, from medical supplies, a 1 quart GI canteen, Nalgene bottle, or other miscellaneous items. I put a 1L Nalgene in mine, as I wanted to stay hydrated on my hike up and down, as well as any clambering I'd be doing.  Up and down rockfaces, into ravines and meandering through the alpine bush.

Read the rest of the review here on Breach Bang & Clear: 






The pouch held up pretty well on my trip, and since, although I found that the 1L Nalgene bottle was a snug fit, and made for a tight zippering, which meant that a couple of times if I didn't zip it up tight it came loose, but I caught it before I lost my bottle. A 1 quart canteen fit easily enough, but I wanted more capacity than that.

Thanks to Anthony for the photography! You'll be seeing more of his work in this series...

Review: First Tatical - Medium Duty Light

I did a "quickie-review" of the First Tactical - Medium Duty Light, which arrived in the mail a few moths ago, and was seen on Breach-Bang-Clear then, but I wanted to give it a bit more thorough a review, because it's come to be a reliable go-to light here in the bunker.

This is the aptly-named Medium Duty Light by First Tactical.

I usually use flashlights that are rechargeable directly, like my now defunct  HEXBright.

Sometime though, you just want some stock-standard batteries pulled out of old TV remotes, drumming bunnies or personal upper-thigh massagers. AA's are everywhere, and the MDL takes them.


Read the rest here on Breach Bang & Clear ...











https://youtu.be/3dYNRNNjcgY

Wish-Lust: Kickstarter - PACE lid

 I love modular and multi-purpose kit, and if I can get and everyday piece of equipment like a drink bottle to do double duty adds a significant thumbs-up from me.

This Kickstarter project, from GoRuck badass, and innovating outdoorsman, Chris Way.



This is the PACE lid, and it's Kickstarter is underway.

PACE stands for Primary, Alternate, Contingency, Emergency. When planning for events in life you have to expect that unforeseen things may happen and knowing this is empowering.

The container in the PACE lid is 300mL (10oz), it's deep enough for an ID or credit card as well as a variety of other gear.

The container is 7.6cm (3") in diameter and 5.7cm (2.25") inches deep. There's a small well around the perimeter that can secure items vertically and in place if they are bent, like cards, matches, other gear items. It's a feature Chris designed in and finds very useful in certain loading particular items in.

So far Chris and his team have tested the PACE lid and found it forms a water tight seal on wide mouth Nalgene, Klean Kanteen, Hydroflask, and MSR bottles.   I have a couple of Nalgene's so their perfect for me.

The prototypes seen here are apparently 3D printed, but the production models will be tooled plastics.

As well as the lids themselves, Chris is offering a pre-filled First Aid PACE, stocked with products from MedTraining Group, who specialize in non-permissive First Response fitting and training. 

If you're super keen, high-end backers can also get training and adventure time with the PACE team, so there are all kinds of benefits to backing this project, big or small.

For me though, it's all about the lids, and stowing my gear, wherever I go.

Be sure to check it out and hopefully, we can get it over the line.

Crumpler - Squid stuff-satchel

It's been quite some time since I added a new Crumpler bag to my collection. Back in 2012 I covered the New Year lucky red Hillman Hunter which was originally meant to be a new satchel for Omega, but seemed to fall into the role of "Tactical Baby" nappy bag.

Prior to that I had covered a Thirsty Al utility pouch and one of the John Thursday camera bags but my first love with Crumpler was their Considerable Embarrassment laptop and courier satchel. I loved that bag. I loved it to death. Crumpler offer a serious lifetime guarantee on their bags, but I had started finding my EDC was getting too much for a shoulder-sling bag to be comfortable lugging, so I moved to twin-shoulder strapped bags.

So, I've following along as new developments come along in the Crumpler line-up, and as Giftmas approached, I spotted a really good deal on their stuff-sack, The Squid.

The Squid is a lightweight, versatile drawstring backpack. It reminded me of the very slick First Strike - Snatch Bag ii  but obviously with a fair bit more marketing and design nuance put in.

The Squid features two storage zones, the main compartment holds 20L and is closed by the dual-coloured extra-thick drawstrings, and a smaller zippered front pocket. That front pocket was big enough to carry my Propper Liberty bottle,  although not enough to zipper it up. The internals of the main compartment are spacious but lacks any internal structure.

The pack is made of a weatherproof 150d ripstop outer fabric which has a very nice texture, and a fairly reliably water resistant. Spills and sloshes seem to run right off it.

Lightweight at only 200g (7oz) and compact, there are no frills, bells or whistles to get in the way of its simplicity. It sits at 28 cm (11.02") wide, and 43 cm (16.93") tall width a depth of  22 cm (8.66"). It easily fits a Nalgene bottle, and the combined Go! Hammock and Go! Apex shelter tarp
easily. The lack of structure means that the pack gets a bit lumpy, but it certainly makes for an easy carry when you don't have to lug a whole ruck around.

It would be perfect for stashing gym or beach gear, groceries, or supplies for a quick bug-out if you hadn't already prepared a bug-out-bag. Equal parts simple and useful.

When slung, the Squid holds itself shut, as the drawstrings also form the shoulder straps. Under a heavy load, they don't offer much padding, but again, it isn't meant to be a full-on ruck.

One of the nice things about its design is that the zipper pocket's internal attachment is sewn such that the whole bag folds up into itself and stows away in a bundle the size of two coffee mugs.

I'm going to be using the Squid as my wet-gear bag, and as an occasional snatch-and-grab bag. I respect and admire the Crumpler products, so I think it will serve me well.

Review: Dual double mag pouch

Here's another item from my bulk load of pouches and packs like the S10 Haversack that I have been slowly rolling out. I had a windfall of a truckload of army surplus gear ages ago, which have been sitting in the bunker, being musty, but there are some real gems in there. These may not be the cutting edge of high-speed, low-drag gear, but have been mil-spec at some stage, so they're damn tough, if nothing else.

This particular pouch came from a box full of here, and I just reached in and grabbed one at random. You can see it's already had a rough life, but has held together.

This double, dual-magazine carrying set of pouches is made of a high Denier (800-1000 I'd guess, by the feel) and are built into a single backing. From the frayed stitching marks, I'd guess that they originally came with some sort of Fastex style clips to act as the primary closure points for the box-like pouches, but was probably removed to speed things up in the field.

A broad loop-field panel on the front of the outside of the pouch acts as the primary closure as a result, with a corresponding hook-field inside the box-top lid. A tongue of webbing with a hook-field can be pulled out from inside the pouch to mate with the loop-field on the front to neutralize the hook-and-loop closure entirely, which was probably useful when the original Fastex loops were still in place.

Internally, the pouches have been given a polyurethane coating for additional waterproofing, and are double stitched throughout. Drainage grommets with a wire mesh grit filter are found in the bottom of each, this would act to keep the grit and sand out of your magazines, and was a nice little feature.

The inside of the box-lid has a little pocked sewn in, big enough for a MRE packet of waterproof matches, a P-38 can opener or maybe a button compass, I found a couple of match-packets and even a couple of water purification tablets when I went through the pouches.

The back panel of the pouches have several different ways to mount, and also shows the vintage of the pouches. ALICE style brass-wire belt hooks, and no PALS-MOLLE to be seen. A pair of steel rings allows extra strapping to be attached to sling the pouches, though the angle of the two ring mountings being different suggests there is a "right way" to do this. A question for the veterans out there. What gives?

The pouches have been stamped with a NSN, but they are all so aged that I couldn't make out the cage numbers. I'd say these pouches would work well doing double duty in much the same way as any of the Platatac FUP or bigger pouches I've grown to love, but with a far older look.

 

Review: Platatac SUP pouch

Here's a very useful pouch that has gone un-sung for a while, but I wear one every day. This is the Platatac SUP II Small Utility Pouch.

It was primarily designed as a pistol magazine pouch, which I got to model with one of the Glock style iCombat CO2 training magazines the SUP mk II can carry a range of items including pistol magazines, multitools or knives, flashlights of up to 1” diameter bezel, flexicuffs and even OC spray if that's your thing.

The pouch has a hook-and-loop removable lid can be adjusted to securely fit items varying in length. There is an internal hard plastic plating within the flap, for one handed operation during the reload or access to your needfuls. Internal elastic retention on the sides allows the SUP mk II to act as a shingle for CQB application. Might not be as tacticool as a TACO pouch but they fully work. I have my second-hand Gerber multitool in one of mine, which lives in the small of my back on one of my rigger belts, everywhere I go.

These low profile pouches are great for storage of quick access items and are small enough to be placed anywhere on your rig without hindrance to your freedom of movement.

The pouch is fitted with PALS/MOLLE attachment system, with a single channel of two rows, one after another (no gape) so you can loop it a couple of ways. Instead of a press-stud closure it has a fiddly hook-field sewn into the bottom webbing loop, and the stiff plastic reinforced tongue has a corresponding field-loop, and a tab of webbing to use as a draw pull. I found this really difficult to set up right, as it was on the opposite side of the tab than I would have expected. This means that to fasten it it has to be doubled over, which made me pretty nervous about how well it attaches.

It's never come loose, even when I have had it rigged for a belt loop, rather than fed through other PALS/MOLLE but I'm just hesitant.

The drainage grommet in the bottom of the pouch nicely frames the needle-nose Gerber pliers, and seats them nicely, and having a good pouch for my multitool has been a crucial part of my EDC.